I planned to do some tests with a problematic image. After careful and logic filtering the possible causes, I finally discovered the sources of error. When the Mac OS Leopard has version till However, when the OS was upgraded to When same image printed to a new Canon T1 color printer, all images are normal. I understand upgrading to newer architecture machines and new operation system does have some technical glitches. I hope I can see some feedback from other schools that have experienced same problem.
Are you sure the Illustrator print settings are identical when you print to the Xerox as when you print to the Canon?
Keep in mind that Illustrator has many different options that could result in a stretched image, including the printer driver settings i. Try printing a picture to both printers from Preview, making sure all the scaling options are turned off. All three of those are sometimes incompatible, contradictory, and have to be set properly to get predictable behavior. Troubleshooting of this sort of issue is often best started by researching at the software company's website. Yes, we have tested the all settings in Illustrator and it still stretches the image on all Intel machines and not the PowerPC machines.
I will use one of the Intel Mac, upgrading to I often search with Google, but maybe my keywords used in search are not close enough for a good search results. Search results are not available at this time. Please try again later or use one of the other support options on this page. Watson Product Search Search.
None of the above, continue with my search. This document contains information on the capabilities that are supported on printer hardware from Xerox. It also indicates whether each printer model is likely to work when printing from the IBM Power Systems. This document contains information on the capabilities that are supported on printer hardware from Xerox and Fuji Xerox.
IBM support does not actively search for information about new or different printers. This document is updated on an as needed basis. Refer to the printer hardware documentation or visit the printer manufacturer's website to locate the printer's specifications to make the determination if it will work with the IBM i. Or, create a printer configuration and see if it works. Most printers that support LPD will accept communication over port regardless of whether the correct remote printer queue value is used.
The following sections provide an explanation for each of the headings in the printer tables provided in the above documents.
Resolving The Problem
Click on the arrow in front of any section to read the explanation. Printers The Printers column contains the name of each printer, or printer series. The printers are grouped by type of printer for example, laser printers, color laser printers, ink jet printers, dot matrix and line printers, and multi-function printers and are generally listed in ascending order. An attempt is made to have an entry for each ASCII printer from a particular manufacturer, whether they are currently marketed by that manufacturer or not.
Printer Data Stream The Printer Data Stream column lists the printer data streams supported by each particular printer. Support for these can differ depending on the data stream. EPL2 is a text based language that uses all keyboard accessible characters to communicate with all other Eltron label printers. It is used primarily in dot matrix line printers, but it is also used in a number of ink jet printers. The XL designates wide-carriage printers, the II and III designate upgrades to the Proprinter data stream, and the 24 refers to the Proprinter data stream used for pin printers.
- best flash card app for iphone and mac;
- ableton live 8 packs free mac!
- how to reset password on mac os x 10.6.8 without disc!
- Featured Products;
- Information on Printers from Xerox and Fuji Xerox.
PostScript was developed by Adobe, but is used by a number of other printer manufacturers, though typically in laser printers. PDF v1. According to the W3C, XHTML is designed to be appropriate for printing from mobile devices to low-cost printers that might not have a full-page buffer and that generally print from top-to-bottom and left-to-right with the paper in a portrait orientation. XHTML-Print is also targeted at printing in environments where it is not feasible or desirable to install a printer-specific driver and where some variability in the formatting of the output is acceptable.
Xerox Phaser Firmware - Windows XP///Vista/7 32/bit/Mac OS X | Xerox
It is an XML-based or XAML-based specification, based on a new print path and a color-managed vector-based document format which supports device independence and resolution independence. Note: If the printer tables refer to any printer data streams other than the ones listed above, then an explanation of those data streams will be included at the bottom of the printer tables. The term Windows Only printer means that the printer was designed to be used only on a PC running a version of Microsoft Windows and was also generally designed to be used in a home or small office environment rather than in a networking environment.
The term host-based printer expands this to refer to any printer that relies on the processing power of the host computer to generate printable pages; for example, if the host computer is running one of the versions of Microsoft Windows, Linux, or Macintosh operating system. The term Windows Only printer is becoming somewhat obsolete because newer printers that fit this category often come with printer software and printer drivers that allow them to be used on Apple Macintosh computers and PCs running one or more versions of the Linux operating system.
However, the term Windows Only printer will often continue to be used to describe host-based printers. Because they rely on the processing power of the host computer, host-based printers do not need a powerful processor of their own and, therefore, they tend to be less expensive than conventional printers.
However, because they share the computer's processor, they might be slow and might slow down other tasks running on the computer. The only way to get a host-based printer to print IBM i family spooled files is to attached it to a host computer and then use printer emulation software, such as a PC printer session, to print the spooled file through the host-based printer driver. Therefore, this column is as much of a statement about the NIC or print server typically shipped with the printer than it is about the printer itself.
Support for the PJL print driver is largely dependent on the internal network interface card NIC or external print server used with the printer. This is commonly found in dot matrix or line printers, ink jet printers, or older laser printers that do not support the HP PCL5e printer language.
Related xerox phaser 7760 driver mac os x
Copyright 2019 - All Right Reserved